wireguard基本安装和配置（by GPT3 达芬奇）

1. 安装wireguard：

sudo apt-get install wireguard

2. 创建配置文件：

sudo nano /etc/wireguard/wg0.conf

3. 编辑配置文件：

[Interface]
Address = 10.0.0.1/24
ListenPort = 51820
PrivateKey = <Your Private Key>

[Peer]
PublicKey = <Peer's Public Key>
AllowedIPs = 10.0.0.2/32
Endpoint = <Peer's IP Address>:51820

4. 启动wireguard：

sudo wg-quick up wg0

5. 检查wireguard状态：

sudo wg show